Lava 20 Coating Grey Various Sizes
Introduction
Lava 20 is a professional-grade polyurethane membrane for long-term waterproofing that is liquid-applied, incredibly resilient, applied cold, dries in air and is moisture cured.
Lava 20, which has high mechanical, chemical, thermal, UV, and natural element resistance qualities, is made of pure viscoelastic waterproof polyurethane resins.
Uses & Applications
• Flat or pitched roof waterproofing
• Waterproofing of terraces, patios, and balconies
• Waterproofing of wet areas (under-tile) in bathrooms, kitchens, terraces, accessory rooms, etc.
• Waterproofing of pedestrian and automobile traffic decks, green roofs, flowerbeds, and outdoor areas.
• Waterproofing of outdated bitumen felts, asphalt felts, BUR, EPDM and PVC membranes, OSB, plywood, concrete, metals, insulation boards, spray foam, cement boards, and old existing coatings ie. acrylics etc.
• Waterproofing and protecting concrete buildings, such as bridge decks, tunnels, stadium stands, parking lots etc.
Advantages
• Easy to use (roller or airless spray).
• A flawless, jointless membrane is formed when applied.
• Water and frost resistant.
• Up to 2 mm of crack mending even at -10 °C.
• Offers porosity for moisture, allowing the surface to breathe.
• Offers exceptional temperature resistance; it never becomes brittle.
• Offers superb weather and UV protection.
• Covers old bitumen- and asphalt-based felts to waterproof them without removing them beforehand.
• Offers high solar reflectivity, which aids with thermal insulation and retains its mechanical characteristics between - 40° C and +90° C
• The waterproofed surface can be utilised for both home and public pedestrian and motor traffic.
• It is resilient to detergents, oils, sea water, and household chemicals.
• If the membrane becomes substantially degraded, it can be restored immediately. The product has received worldwide acclaim for more than 15 years!
• Application does not require the use of an open flame (torch).
Consumption
1,4 - 2,5 kg/m2 applied in one or two layers. Its coverage is dependent on proper application with a roller onto a smooth surface.
Consumption may vary depending on surface porosity, temperature, and application technique. Consumption increases when fabric reinforcing is used.
Introduction
Lava 20 is a professional-grade polyurethane membrane for long-term waterproofing that is liquid-applied, incredibly resilient, applied cold, dries in air and is moisture cured.
Lava 20, which has high mechanical, chemical, thermal, UV, and natural element resistance qualities, is made of pure viscoelastic waterproof polyurethane resins.
Uses & Applications
• Flat or pitched roof waterproofing
• Waterproofing of terraces, patios, and balconies
• Waterproofing of wet areas (under-tile) in bathrooms, kitchens, terraces, accessory rooms, etc.
• Waterproofing of pedestrian and automobile traffic decks, green roofs, flowerbeds, and outdoor areas.
• Waterproofing of outdated bitumen felts, asphalt felts, BUR, EPDM and PVC membranes, OSB, plywood, concrete, metals, insulation boards, spray foam, cement boards, and old existing coatings ie. acrylics etc.
• Waterproofing and protecting concrete buildings, such as bridge decks, tunnels, stadium stands, parking lots etc.
Advantages
• Easy to use (roller or airless spray).
• A flawless, jointless membrane is formed when applied.
• Water and frost resistant.
• Up to 2 mm of crack mending even at -10 °C.
• Offers porosity for moisture, allowing the surface to breathe.
• Offers exceptional temperature resistance; it never becomes brittle.
• Offers superb weather and UV protection.
• Covers old bitumen- and asphalt-based felts to waterproof them without removing them beforehand.
• Offers high solar reflectivity, which aids with thermal insulation and retains its mechanical characteristics between - 40° C and +90° C
• The waterproofed surface can be utilised for both home and public pedestrian and motor traffic.
• It is resilient to detergents, oils, sea water, and household chemicals.
• If the membrane becomes substantially degraded, it can be restored immediately. The product has received worldwide acclaim for more than 15 years!
• Application does not require the use of an open flame (torch).
Consumption
1,4 - 2,5 kg/m2 applied in one or two layers. Its coverage is dependent on proper application with a roller onto a smooth surface.
Consumption may vary depending on surface porosity, temperature, and application technique. Consumption increases when fabric reinforcing is used.
Introduction
Lava 20 is a professional-grade polyurethane membrane for long-term waterproofing that is liquid-applied, incredibly resilient, applied cold, dries in air and is moisture cured.
Lava 20, which has high mechanical, chemical, thermal, UV, and natural element resistance qualities, is made of pure viscoelastic waterproof polyurethane resins.
Uses & Applications
• Flat or pitched roof waterproofing
• Waterproofing of terraces, patios, and balconies
• Waterproofing of wet areas (under-tile) in bathrooms, kitchens, terraces, accessory rooms, etc.
• Waterproofing of pedestrian and automobile traffic decks, green roofs, flowerbeds, and outdoor areas.
• Waterproofing of outdated bitumen felts, asphalt felts, BUR, EPDM and PVC membranes, OSB, plywood, concrete, metals, insulation boards, spray foam, cement boards, and old existing coatings ie. acrylics etc.
• Waterproofing and protecting concrete buildings, such as bridge decks, tunnels, stadium stands, parking lots etc.
Advantages
• Easy to use (roller or airless spray).
• A flawless, jointless membrane is formed when applied.
• Water and frost resistant.
• Up to 2 mm of crack mending even at -10 °C.
• Offers porosity for moisture, allowing the surface to breathe.
• Offers exceptional temperature resistance; it never becomes brittle.
• Offers superb weather and UV protection.
• Covers old bitumen- and asphalt-based felts to waterproof them without removing them beforehand.
• Offers high solar reflectivity, which aids with thermal insulation and retains its mechanical characteristics between - 40° C and +90° C
• The waterproofed surface can be utilised for both home and public pedestrian and motor traffic.
• It is resilient to detergents, oils, sea water, and household chemicals.
• If the membrane becomes substantially degraded, it can be restored immediately. The product has received worldwide acclaim for more than 15 years!
• Application does not require the use of an open flame (torch).
Consumption
1,4 - 2,5 kg/m2 applied in one or two layers. Its coverage is dependent on proper application with a roller onto a smooth surface.
Consumption may vary depending on surface porosity, temperature, and application technique. Consumption increases when fabric reinforcing is used.